Specifications

10
When loading 220 roll film in its exclusive film back, do not mistake
the dotted line for the starting point, as it is located before the arrow
marks.
I. The film back winding crank is used for advancing the film, when
the film back is detached from the main body for film loading. The
film back winding crank can continue to rotate, even when the film is
set for the first exposure. It should be rotated 2 or 3 times more, in
order to take up any slack in the loaded film.
H. Upon loading the film, rotate the film winding crank until it stops
to place the first frame into place for taking the picture. The exposure
counter will also change from "S" to "1", while the shutter will also be
cocked.
5. Film Loading (con’t)
*If the film is not advanced when the film winding crank is rotated,
the film holder is not inserted properly and/or the camera main body
may be set for multiple exposures. In the latter case, return the multi-
ple exposure lever to an upright or vertical position. (See Section 21:
Multiple Exposures)
G. Close the back cover, by pressing firmly against the base of the
film back, as illustrated. The back cover will automatically close and
lock, with the safety lock also locking the back cover release button.
The same operation will close the back cover when the film back is
detached from the body.