Instruction manual

* A brown-colored flexible printed ring will be seen, at the hinge section, when the back

cover is opened. Do not pull, cut or otherwise damage it, as it is used for transmitting the

ASA/ISO data.

* Both camera main body and lens must be in the "cocked" condition

to attach or remove the lens. In other words, the cocking pin of the

lens must be set between the red band and green dot, in this case,

while the cocking pin of the body mount must be set to the green-

colored dot. When not set in this way, move the cocking pin of the

lens manually to the green-colored dot and rotate the film-winding

crank to set the cocking pin of the main body mount.

31. Care of the Zenza Bronica GS-1 (con’t)