Instruction manual

22
27. Removal and Attachment of the Film Winding Crank Assembly
The film-winding crank assembly must be removed when attaching the Speed Grip G to the
Zenza Bronica GS-1.
A. Pull the release lever on the base of the film-winding crank assem-
bly outward and, at the same time, rotate the base in the counter-
clockwise direction and the film-winding crank assembly will become
detached.
* Upon detaching the film-winding crank assembly from the main
body, place the cover, which is supplied with the Speed Grip G, over
the exposed bayonet mount to protect it from dust and foreign mat-
ters.
B. To attach the film-winding crank assembly to the main body, first,
remove the cover from the bayonet mount. Then, align the base of
the film-winding crank assembly to the bayonet, insert and then
rotate in the clockwise direction until securely attached.
A. First, insert the U-shaped ring into the neck strap eyelet, as illus-
trated.
B. Next, place the plastic ring cover over the U-shaped ring, as illus-
trated.
28. Attachment of the Neck Strap