Instruction manual

16
17. Interchanging Finders
A. Various types of optional finders can be interchanged to match
shooting conditions to photographic conditions. To attach the finder,
align the front end of the finder with the front end of the finder
frame on top of the main body, as shown. Then, gently lower the
finder and, when well seated, slide forward until it locks.
B. To detach the finder, simply depress the finder release button and,
at the same time, slide the finder backwards where it can be
detached.
* Read instructions supplied with the optional finders on their use.
A. The aperture ring is rotated, in either direction, to set the required
F/number opposite the white index dot. The aperture ring click-stops
at the numbered settings, as well as intermediate ½ stop settings.
The aperture ring may also be set midway between the ½ click-stops
also.
* The intermediate ¼ stop settings cannot be used when finders with
a built-in exposure meter are used. Click-stop settings only can be
used in this case.
B. The Zenzanon-PG Series interchangeable lenses have a fully auto-
matic lens diaphragm, which means that the focusing screen is
always viewed at the full aperture, with the brightest possible image.
Depressing the depth of field preview lever stops the lens diaphragm
down to a pre-selected lens opening and permits checking of the
depth of field effect on the focusing screen.
* The aperture ring must not be adjusted while the depth of field pre-
view lever is being depressed.
18. Setting the Aperture Ring