Instruction manual

6. Film Loading (con’t)

E. Rotate the manual film winder on top of the film holder in the

arrow-indicated direction and wind up the film leader. When the

starting point, or arrow-mark appears, align it with the triangular

start-mark on the right-top side of the film holder. Then, stop rota-

tion.

F. The starting point can also be aligned with the start-mark, with the

film holder loaded in the film back. In this case, simply rotate the film

winding crank of the main body to align the start-mark. This method

is preferable since there will be coupling with the camera body

mechanism from the beginning.

* If the film is not advanced when the film winding crank is rotated,

however, the film holder is not loaded properly in the film back

and/or the camera main body may be set for multiple exposures. In

the latter case, return the multiple exposure lever to an upright or

vertical position. (See 23. Multiple Exposures.)

G. Close the back cover by pressing it firmly against the right side of

the film back base, as illustrated. The back cover will automatically

lock and close. The same operation will close the back cover when

the film back is detached from the main body.

H. Upon loading the film, rotate the film winding crank until it stops

to place the first frame into place for taking the picture. The exposure

counter will also change from "S" to "1", with the film advanced and

the shutter cocked.