Instruction manual

1. LOADING THE BATTERY

A. The electronically-controlled shutter

will not work without loading the battery.

The shutter will be mechanically

controlled, without a battery, and will be

released at 1/500 sec., regardless of the

setting on the shutter speed dial.

4.butkus.org

Use one silver oxide battery (EVEREADY

No.544 or equivalent).

* The battery can be purchased in most

photographic supply or electrical appliance

stores.

B. Depress the battery chamber button with your finger while, at the

same time, moving the battery chamber cover in the arrow-indicated

direction and the cover will come off.

C. Coincide the polarity marks (+) ( -) on the battery with similar

polarity indications in the battery chamber. Then, push in the negative

end of the battery first and follow with the positive end.

Insert the battery chamber cover into place, by first inserting the end

marked BATTERY. Then move the cover opposite to the arrow-

indicated direction until it locks.

* Should the battery be reversed, the shutter will only work

mechanically at 1/500 sec.