Instruction manual

21. FILM TYPE INDICATOR FRAME
Upon loading the film, tear off the end flap from the empty film
package and insert it in the film type indicator frame. This will help
you keep track of the film loaded in the film back and should prove
useful when two or more film backs are used, with different types of
films.
22. ATTACHING AND REMOVING THE NECK STRAP
A. Attaching the Strap
As illustrated, press the spring
catch and, at the same time, move
the black plastic fitting back
towards the neck strap, which will
expose an opening on the
opposite side. Place the opening
over the neck strap stud on the
camera body and then pull
strongly- on the strap, which will
lock the fitting to the stud.
B. Detaching the Strap
Hold the neck strap, as illustrated, and depress the spring catch while, at the same time pushing the metal fitting
forward, as far as it will go. Then, lift the fitting up from the stud.
C. The shoulder pad is supplied separately from the neck strap and
should be used in the following manner. First, adjust the neck strap to a
suitable length and then fix the shoulder pad on the inside of the neck
strap, at the point where it will rub against the shoulder.