Instruction manual

A. The focusing screen can be exchanged, depending on the type of photographic work being undertaken.

First, remove the finder attached to the camera body. Then, move the screen removal lever in the arrow-

indicated direction, as illustrated. Finally, lift it up by the lever.

B. To install the focusing screen, insert the protrusions at the forward end of the focusing screen frame into

corresponding openings in the focusing screen frame of the body. Then, drop the rear end of focusing screen

and slide the screen removal lever to the right.

C. The standard focusing screen has a split-image rangefinder spot, with the split oriented at 45° diagonal,

which is surrounded by a microprism ring and, finally, a full-area matte screen plus fresnel lens.

A focusing screen with matte center plus full-area fresnel lens outside the center spot is also available.