Instruction manual

10. FOCUSING ADJUSTMENTS

A. The lens is focused on the subject, by rotating the focusing ring in either direction, while checking the effect

on the microprism / split-image rangefinder spot in the center of the focusing screen (standard type).

B. The central split-image spot splits the image diagonally, with the upper and lower halves being separated

diagonally when the lens is out of focus. When in focus, however, the two halves will coincide with the

diagonal displacement disappearing. The microprism ring surrounding the central spot can also be used for

checking the sharpness of the focused image, since the image will glitter when the lens is not focused.

The full-area matte surface surrounding the central focusing aids can also be used for checking image

sharpness.

11. FILM ADVANCE AND SHUTTER COCKING

Rotating the film winding crank completely one time, in the forward direction, will advance the film one frame

and, at the same time, cock the shutter, with the winding action stopping automatically. On the other hand,

short, rapid strokes, up to an accumulated full rotation, will also do the job

11.

12.

13.