Instruction manual

7. EXCHANGING LENSES

A. THE LENS CANNOT BE DETACHED OR ATTACHED UNLESS THE SHUTTER IS COCKED.

Therefore, first, rotate the film winding crank and cock the lens shutter. Next, rotate the milled locking ring on

the lens release button 45° in the clockwise direction and then depress the lens release button.

Next, while keeping the lens release button depressed, rotate the lens in the clockwise direction, too, until it

makes a full stop, at which point it can be detached.

The locking ring on the lens release button will automatically return to "lock" when pressure is released from

the lens release button.

B. To attach the lens to the body, first, align the red dots on the lens and body and then insert the lens fully into

its mount. Rotate in the counterclockwise direction until it stops, with an audible click which will indicate that it

is securely locked.

*The lens cannot be attached unless the film is advanced and the shutter cocked on the body.

8. WAIST-LEVEL FINDER

A. The focusing hood of the waist-level finder is opened by pushing or pulling up on the focusing

hood/magnifier catch at the rear end of the folded waist-level finder.