Instruction manual

The
Zenza
Bronica GS-l
has
an
electro-magnetic
shutter
release
system
which
means that the
usual
cable
release cannot be
used.
A
Zenza
Bronica
Electro-Magnet
Cable
Release
is
available
for
this
purpose,
although it is also
possible
to use any cable
release
with
a 2.5mm
mini-plug,
such as
those
available
in
photographic
equipment
stores.
*
Always
check
operations
be-
fore actually
using
such
cable
re
leases.
@
A.
The
focusing
screen can be
exchanged,
depending
on the
type
of
photographic
work be-
ing undertaken.
First,
remove the
finder
attach-
ed
to the camera
main
body.
Then,
move
the
screen
removal
levers
on both sides
in the
arrow-indicated
directions,
as
illustrated.
Then,
using a
pincer
or similar
tool,
lift
up the screen
with
the
protrusion
at the
rear
end.
B.
To
install the focusing
screen, nest the
protrusion
at
the
rear
end of
the screen
in a
corresponding
groove
on
the
camera
main
body.
Then,
slide
both screen
removal
levers
forward
to secure
the
focusing
screen.
*
lt
will
not
be
possible
to at-
tach
the
finder, if the screen
removal
levers are
not in their
forward
positions.
*
There
are seven
interchange-
able
focusing
screens
for the
Zenza
Bronica
GS-1 .
www.orphancameras.com