User's Manual

ON, OFF AND RESET
The console will turn ON when:
- pressing any button
The console will turn OFF when:
- long press XE
- no cadence or heart rate for 5
minutes
When turning o the display
all data and individual settings
will be reset and the console is
ready for a new user.
To reset recorded data only:
- long press F and the message
“Hold to clear” will appear.
Press the button down for 5
sec and all recorded data will
be reset. Heart rate pairing and
individual settings will be kept.
This function is useful if you
have used the console during
warm-up before the actual class
starts.
PUSH BUTTONS
W and X are for navigating
between screens and for
adjusting values in setting
mode. Hold down the arrow to
increase/decrease rapidly.
F is for entering setting mode
and for accepting individual
values. A long press will reset
time and data measurements.
XE is for starting or pausing
time and data measurements. A
long press will turn o console.
DEFAULT SETTINGS
In the default settings it is
possible to change 3 settings:
- Model (Cad/Po)
- Code for control box
- Units (Kg/lb, km/Mi).
Please note:
Individual
settings like age, MHR and
weight can be changed in
setting mode, see page 19-21.
1: Enter default settings
by taking out the batteries
and press any button while
reinserting the batteries. A full
screen display will indicate that
you have entered the default
settings. Press F to accept.
BODY
BIKE
®
INDOOR CYCLE
17
USING THE CONSOLE