User's Manual

Version 1.0 Copyright by Indoorcycling Group GmbH 2009 | www.indoorcycling.com ENG 3
ASSEMBLY
1
2
1
WIRELESS COMPUTER
hand tight
☞
1
2
default setting
The channel transmitting the cadence signal
from the transmitter to the computer consol is
pre set. A sticker on the housing indicates the
preset channel on computer & transmitter.
The channel can manually be changed. To
avoid cross reading please assure a clearance
of 52`` (1,3m) between components set on
identical channels or simple swap to another
channel (page 7, picture 10).
To assure that the digital cadence signal is
synchronized, please check if the channel
setting on the computer consol corresponds
with the setting of the cadence transmitter.
Please view picture no. 2 and 3.
ENG