Installation & Assembly

Pull up all stakes from the ground. Press the push button on each leg and retract the legs to their original height.
Get in the underneath of canopy, pull ring to unlock the frame.
With the canopy feet facing the rollers, slide the wheeled storage bag over the closed canopy frame. Close the
zipper on the wheeled storage bag.
REPLACEMENT PARTS
Canopy Frame (1pc)
Carry Bag (1pc)
Awning Pole (2pcs)
Parts List
Hardware
INSTER THE AWNING POLE TO THE
EDGE OF THE TOP.SLIDE THE POLE UP.
Big Top (1pc)
5
ADJUSTING THE CANOPY HEIGHT
6
SECURE THE CANOPY IN PLACE
7
TAKE DOWN THE CANOPY
Lift one corner of the frame until all legs are raised off the ground except for one leg. Push inward from the side
opposite the leg on the ground until the frame is fully closed.
Pull awning pole out of the edge for the top.
Small Top (1pc)
AA - Stake (4pcs)