Operation Manual

- 27 -
Conditions
Causes
Solutions
No reaction
No Power
Check the power supply
Not connected with remote control Perform the connection again
Remote control is running out of energy Replace the battery
Remote control is damaged Contact the distributor for service.
Motor is damaged Contact the distributor for service.
Connection and code
identification fail
No Power Check the power supply
Remote control is running out of energy Replace the battery
Remote control mode error Switch the operation mode
Remote control is damaged Contact the distributor for service.
Motor is damaged Contact the distributor for service.
No “beeping” sound during
connection
No Power Check the power supply
Remote control is running out of energy Replace the battery
Buzzer is damaged Contact the distributor for service.
Remote control is damaged Contact the distributor for service.
Not be able to perform the
setting operation
Remote control is running out of energy Replace the battery
Remote control mode error Switch the operation mode
Remote control is damaged Contact the distributor for service.
Motor is damaged Contact the distributor for service.
No “beeping” sound during
the setting operation
Buzzer is damaged Contact the distributor for service.
Cannot rotate to the target
position.
Motor is damaged Contact the distributor for service.
Cannot set the Preferred
position.
Remote control mode error Switch the operation mode
Remote control is damaged Contact the distributor for service.
Motor is damaged Contact the distributor for service.
LCD is not lit
Remote control is running out of energy Replace the battery
Remote control is damaged Contact the distributor for service.
Not able to perform the
multi-window control
Remote control mode error Switch the operation mode
Remote control is running out of energy Replace the battery
Remote control is damaged Contact the distributor for service.
※If the above conditions occur, it is necessary to contact the distributor for services. Please do not
disassemble the device by yourself.
Troubleshooting