Operation Manual

- 23 -
1. Switch the remote control to【User Mode】。
2. Each motor could set 2 preferred positions exclude the upper and lower
limit.
3. Set preferred position:
 Use remote control to lift blinds to target positions.
 Press【Stop】and【Enter】simultaneously, it is complete when motor responds with
beep sound.
4. Cancel preferred position:
 Use remote control to lift blinds to target preferred positions.
 Press【Stop】and【Enter】simultaneously, it is complete when motor responds with
beep sound。
5. Notice! If 2 preferred positions are configured, the motor will not receive
the command【Set the Preferred Position】any more.
6. If need to change the preferred position, please cancel one of the preferred
position first.
Press
【
Stop
】
and【Enter】
simultaneously
※
Notice:
Before setting the Preferred Position, please make sure that the【Mode Selection Switch】has been
toggled to
【
User Mode
】
.
Beep
Set / Cancel the Preferred Positions