Operation Manual

- 21 -
This function allows to duplicate codes from a remote control to another
without pressing the "Code" button on motor .
1. Switch the original remote control (RM-A) and the duplicate one (RM-B) to
【Setting Mode】。
2. Select the channel needs to be copied on RM-A.
3. Open the battery cover on RM-A, use a thin rod to press shortly on the 【Copy】
button located above the battery, when the motor responds with a beep sound then the
motor is ready to be connected
。
4. Select a channel on RM-B which will connect to the motor.
5. Press【Up】and【Down】on RM-B simultaneously, it completes receiving codes when
the motor responds with beep sound.
Duplicate Remote Control
Use a thin rod to press shortly on the
【Copy】 button：
To start "code" function on
motor, allow other remote
controls to connect.
Beep
Press the
【
Up
】
and【Down】
simultaneously