Operation Manual

- 18 -
4. Enter the Lower Limit Setting:
 Press 【Stop】and【Down】simultaneously; when the motor responds with a
“beeping” sound, it enters the Lower Limit Setting Mode.
5. Set the Lower Limit:
 Use remote control to lift blinds at the target position for setting the lower limit.
 Press【Stop】and【Enter】 simultaneously; when the motor responds with a
“beeping” sound, the lower limit setting is complete.
6. If need to reset the upper/lower limit again, please repeat『Step 2~3』or
『Steps 4~5』.
※
Notice:
After the
【
Upper/Lower Limit Setting
】
is complete, please toggle the
【
Mode Selection Switch
】
back to【User Mode】.
If need to reset the limit position, either upper limit setting or lower limit setting could be executed
separately.
Press
【
Stop
】
and
【
Down
】
simultaneously
Beep
Press【Stop】and
【
Enter
】
simultaneously
Beep