Operation Manual

- 16 -
1. Switch the remote control to【Setting Mode】。
2. Switch Between Forward and Backward Rotations：
Press【Stop】for 3 seconds; when the motor responds with a “beeping” sound, the
process for switching between forward and backward rotation is complete.
Switch Between Forward and Backward
Beep

Press
【
Stop
】
for 3 seconds.
※
Notice:
Unless it is necessary to change the rotation direction , please do not press【Stop】for more than
3
seconds.
It requires to reset the upper/lower limit again if the rotation direction has been changed after the
setting of upper/lower limit is complete.