Operation Manual

- 14 -
1. Switch the remote control to【Setting Mode】。
2. Channel Selection:
Press any button of「」、「 」、「 <」、「 >」to select the channel needs to be
connected.
3. Code: To establish a connection between the motor and the remote control.
 Press【Code】on the motor for 1 second, the motor will respond “beep “.
Set Connection Between Motor
and Remote Control
Press the【Code】to start code identification.
Press any button of【】
、【

】、
【
＜
】、【
＞
】to move cursor [ ]
to the target channel