Operation Manual

- 13 -
1. The tubular motor could operate either【Roller system】or【Venetian system】.
【Roller system】: It could not adjust by degrees on User Mode, but only could on Setting Mode.
【Venetian system】: It could adjust by degrees both on User Mode and Setting Mode.
2. How to switch:
 Switch the remote control to【Setting Mode】.
 To enter【Roller system】, press both【UP】&【Enter】for 2 seconds until the cursor [ ] lit.
 To enter【Venetian system】, press both【DOWN】&【Enter】for 2 seconds until the cursor [ ]
lit.
Press the
【
Up
】
button
and【Enter】button
simultaneously
Press the
【
Down
】
button
and【Enter】button
simultaneously
Roller system
（
Default
）
Venetian system
Switch blinds system
※
Notice:
Once the system has been chosen, all channels are in the same system.
Roller System is the initial setting from factory.