Operation Manual

- 12 -
4. Mode Switch：
 Open the battery cover on the remote control.
 Toggle the【Mode Selection Switch】located above the battery.
Note: It is necessary to use a thin rod to toggle the switch.
 After finish toggling【Mode Selection Switch】, close the battery cover
immediately.
※
Notice:
Unless the motor requires reset, please keep the
【
Mode Selection Switch
】
in
【
User Mode
】
.
Schematic Diagram of
Mode Selection Switch
Setting Mode
The switch is at
the right position
User Mode
The switch is at
the left position
3. After the mode selection is
completed, close the b
attery
cover immediately.
1. Open the battery cover.
2.
Toggle the Mode Selection Switch