Operation Manual

- 10 -

 Screen display sequences after installing battery



Battery installation

1. Open the battery cover

2. Insert the battery (notice the polarity ○

＋

/○

－

)

3. Close the battery cover

4. Battery specification: DC 6V (CR2032)

3.1 In Setting Mode:

only Window Channels

1 ~ 16 appear.

1. All icons appear

after installing battery

2. Battery icon flashes 2

times than disappear,

remote control is ready

for using after battery

icon disappear.

3.2 In User Mode:

appear Group

Channels, Window

Channels, and All.

5.Low battery

It could not do settings

while the battery icon

flashes,please change a

new one immediately

4. If [All] is selected,

Group Channels and

Window Channels will

disappear.

About the battery

 The battery provided with the product is prepared for your initial

use.

 For the battery replacement, please use a battery with the same

specifications.

 If the remote control is not going to be used for a long time, please

take the battery out.

※Notice: