User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
99
Figure 86 Climate Control – Temperature Setpoint
The parameters available are:
Button to Change between ºC and ºF [disabled/enabled]: enables a control
that allows the temperature scale to be changed from the box itself:
Include Plus Sign before Positive Numbers [disabled/enabled]: adds the ‘+’
sign before positive temperature values.
Indicator Type:
➢ [
Just Setpoint Temperature]: only the setpoint temperature will be displayed.
➢ [Setpoint is Main and Real is Secondary]: this option shows two
temperatures at the same time. The real temperature will be displayed below
the setpoint temperature in a smaller font size and accompanied by a house
icon.
➢ [Setpoint is Secondary and Real is Main]: this option shows two
temperatures at the same time. The setpoint temperature will be displayed
below the real temperature in a smaller font size and accompanied by a
thermometer icon.