User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
94
Indicator Type [Icon / Text]: allows selecting whether the status indicator which
each value is represented will be text type or icon type. As many drop-down lists
of icons or text boxes will be displayed as states have been enabled in the
previous parameter.
2.2.2.1.3.6 Two Scene
Analogously to the 1-button scene control, 2-button scene controls allows sending the
KNX bus a scene value, however in this case there will be two buttons in the box, each of
which can be configured independently.
Figure 82 2-Button Control – Two Scenes
Top / Bottom Scene [1…64]: value of the scene that will be sent to the bus after
pressing on the top and bottom button.
➢ Action [
Run / Run and Save]: sets whether the device will only send orders
to execute specified scene (after a short press) or if will be possible to send
orders to save the scene (after a long press).
➢ Object to Use [
General Scene Object / Individual Box Scene Object]:
specifies whether the scene value will be sent through the object "[General]
Scenes: Send" or through the individual object for each: "[Ci] Top Scene:
Send" and/or “[Ci] Bottom Scene: Send”.