User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
92
Long Press Threshold Time [4…6…50] [ds]: sets the minimum time the user
should hold the button in order to consider it a long press.
State Object [Short Press Object / Long Press Object]: allows setting the control
command to which the status indicator, "[Ci] Two Objects - Indicator", will
obey. This object can also receive values from the bus.
Indicator Type [Icon / Text]: allows selecting whether the status indicator which
each value is represented will be text type or icon type.
2.2.2.1.3.4 Numerical Controls
If any of the functions “Counter”, “Scaling” or “Float” is assigned to the control, user
touches over the buttons will trigger the sending of a certain numerical value to the bus.
This value will be progressively increased or decreased with every touch on top button or
button bottom, through the control object, while the box itself will permanently reflect the
current value of the corresponding status object. This object can also receive values from
the bus.
Figure 80. 2-Buttons Control - Numerical Control
The different types of 2-button numerical control available, their configuration options and
the objects associated with them are listed in the following table: