User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
91
➢ For percentage indicator, the symbol % always will be displayed as unit.
➢ The temperature indicator will be shown in ºC or ºF depending on the value
of the active locale (see section 2.1.2). In addition, the following parameters
will be available for this control type:
• Button to Change between ºC and ºF [
disabled/enabled]: enables a
control that allows the temperature scale to be changed from the box itself:
Figure 78. Temperature 2-Buttons Control (Box)
• Include Plus Sign before Positive Numbers [disabled/enabled]: shows
the ‘+’ sign before positive temperature values.
2.2.2.1.3.3 Two Objects (Short Press/Long Press)
Control for sending specific binary values both after a short or a long press on any of the
two buttons. Two different objects are used to send values for short and long pulsations,
"[Ci] Two objects - Short Press" and "[Ci] Two objects - Long Press".
Figure 79. 2-Buttons Control - Two Objects
Action on Short / Long Press [Bottom = 0; Top = 1 / Top = 0; Bottom = 1]: sets
the value to be sent when short / long pressing each of the two buttons.