User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
88
Show Pop-Up When Activating MUR [No / Pop-Up 1 / … / Pop-Up 6]: allows
to select the pop-up to be displayed when the MUR mode is activated.
Note: the pop-ups selected must be activated (see section 2.1.14.2).
This control will have associated a dedicated object for the indicator (“[Ci] Room State
Indicator”), which is automatically updated after the control order is sent and when values
are received from the bus.
2.2.2.1.2.7 Enumeration
The box will behave analogously to the case of the switch, however the communication
objects (control object “[Ci] Enumeration Control” and the status “[Ci] Enumeration
Indicator”) will be 1-byte. Up to six discrete states can be distinguished depending on the
value that the status object acquires from the control or receives from the bus.
Figure 74. 1-Button Control – Enumeration.
The available parameters are:
Number of Values [1…2…6]: number of states that will be distinguished. For
every distinguished state, the parameter Value [0…255] will become available
together with the corresponding indicator.
Indicator Type [Icon / Text]: allows selecting whether the status indicator which
each value is represented will be text type or icon type. As many drop-down lists
of icons or text boxes will be displayed as states have been enabled in the
previous parameter.