User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
84
Figure 68. 1-Button Control - Switch
Action [Send 0 / Send 1 / Toggle 0/1]: specifies what value will be sent to the
bus after pressing the control button.
Indicator Type [Icon / Text]: allows selecting whether the status represented by
each indicator value will be text type or icon type.
2.2.2.1.2.2 Two Objects (Short Press/Long Press)
The button in the box will react differently to a short press and to a long press, setting a
time threshold to distinguish both types of press by parameter.
Figure 69. 1-Button Control - Two Objects
Action on Short / Long Press [Send 0 / Send 1 / Toggle 0/1 / Send 1-Byte
Unsigned Integer Value]: sets what value will be sent to the bus before which
events.
When the option “Send 1-Byte Unsigned Integer Value” is selected, the value
indicated in Value [0…255] parameter will be sent.