User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
82
Signed
-128 – 127
[Ci] 1-Byte Signed Int Indicator
2 Bytes
Unsigned
0 – 65535
[Ci] 2-Byte Unsigned Int Indicator
Signed
-32768 – 32767
[Ci] 2-Byte Signed Int Indicator
4 Bytes
Unsigned
0 – 4294967295
[Ci] 4-Byte Unsigned Int Indicator
Signed
-2147483648 – 2147483647
[Ci] 4-Byte Signed Int Indicator
Percentage
1 Byte
0 – 100
[Ci] Percentage Indicator
Float
2 Bytes
-671088.64 – 670433.28
[Ci] 2-Byte Float Indicator
4 Bytes
-3,403x10
38
– 3,403x10
38
[Ci] 4-Byte Float Indicator
Temperature
2 Bytes
Float
-99 – 199
[Ci] Temperature Indicator
Cost
1 Byte
Unsigned
0 – 255
[Ci] Cost Indicator: 1-Byte Unsigned Int
Signed
-128 – 127
[Ci] Cost Indicator: 1-Byte Signed Int
2 Bytes
Unsigned
0 – 65535
[Ci] Cost Indicator: 2-Byte Unsigned Int
Signed
-32768 – 32767
[Ci] Cost Indicator: 2-Byte Signed Int
2 Bytes
Float
-671088.64 – 670433.28
[Ci] Cost Indicator: 2-Byte Float
Table 3. Numerical indicators
Units: permits specifying the measuring units of the displayed value.
Note:
➢ For percentage indicator, the symbol % always will be displayed as unit.
➢ The temperature indicator will be shown in ºC or ºF depending on the active
locale (see section 2.1.2). In addition, the following parameters will be
available for this control type:
• Button to Change between ºC and ºF [
disabled/enabled]: enables a
control that allows the temperature scale to be changed from the box itself:
Figure 65. Indicator - Temperature (box)
• Include Plus Sign before Positive Numbers [disabled/enabled]: shows
the ‘+’ sign before positive temperature values.
➢ For cost indicator, choosing as a unit the currency associated with it, from a
list of available ones, will be mandatory. This will be placed before or after
the indicator, according to the active locale (see section 2.1.2).