User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
81
Figure 63 Indicator - Enumeration
Number of Value [1…2…6]: sets the number of states in the enumerated list.
For every distinguished state, the parameter Value [0…255] will become
available together with the corresponding indicator.
Indicator Type [Icon / Text]: enables to select whether the status indicator which
each value is represented will be text type or icon type. As many drop-down lists
of icons or text boxes will be displayed as states have been enabled in the
previous parameter.
2.2.2.1.1.3 Numerical Indicators
Indicators configured as “Integer”, “Percentage”, “Float”, “Temperature” and “Cost” are
numerical type indicators that show the value of the corresponding communication object,
enabled when that control is assigned to a box.
Figure 64 Indicator - Numerical
The range of values allowed for each type and the name of the corresponding object are
included in the following table.
Function
Size
Sign
Range
Related Object
Integer
1 Byte
Unsigned
0 – 255
[Ci] 1-Byte Unsigned Int Indicator