User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
79
Visualization: box format. The available box formats in Z70 v2 are:
➢ [
Indicator]: the box will work as a status indicator.
➢ [1-Button Control]: the box will work as a one-button control.
➢ [2-Button Control]: the box will work not only as a status indicator, but also
as a two-button control.
➢ [Climate Control]: the box will act as a climate indicator and a climate control.
➢ [Other]: the box will implement some other special functionality.
Function: depending on the “Visualization” type selected, the parameters below
will change. The following sections explain the available parameters depending
on the visualization type selected.
Icon and/or Button: drop-down list with the available icons to show in the
indicator(s) and/or button(s) of the box. At the end of the list, the custom icons
(“Cx”) that must have been previously imported in Z70 v2, can be selected (see
section 2.1.11.4).
Note: a list with all icons available can be found in document “Z70 v2 Icon list”,
available at www.zennio.com.
Log & Graph [Disable / Record Log / Record Log and Show Graph]: sets if
received data through the indicator object will be recorded and if the graph will
be displayed. See ANNEX IV. Graphs for more information.
If Record Log and Show Graph is enabled, the following parameters will be
displayed:
➢ Show Hour Zoom [disabled/
enabled]: sets whether the hour zoom is
enabled on the control graph.
➢ Graph Type [Curve / Straight / Step]: graph types available for the control.
The options for this parameter will depend on the type of control chosen and
will only be displayed for non-binary types.
➢ Polarity [
0 = Low Level; 1 = High Level / 0 = High Level; 1 = Low Level]:
sets which is the high level and which is the low level depending on the value
received. This parameter will only be displayed on binary type controls.