User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
77
Control Distribution [Nothing / Control 1…Control 180]: enables selecting
which control, from a list of 180 controls, will be placed in each of the twelve
possible boxes on the screen.
Protect: sets whether the page will be password-protected or not. Depending
on the security levels configured (one or two; see section 2.1.4) this list will
contain the following options:
➢ One Level:
• [
No / Yes]: sets whether the page is password-protected at level 1 or
without a password.
➢ Two Levels:
• [
No / Level 1 / Level 2]: sets the level of security to access the page.
Objects to Show/Hide Box [disabled/enabled]: enables or disables a 1-bit
object for each enabled box in which a control has been configurated (“[Pn][Bi]
Show/Hide Box”) to show or hide the corresponding box.
2.2.2 CONTROLS
User interface can have up to 180 different controls placed on 12 pages. Each of this
controls will be configurated independently and placed in the desire box of the page (see
section 2.2.1.3).
Within the controls tab, sub-tabs with groupings of up to 15 controls each are displayed to
do parameterization easier.
ETS PARAMETERISATION
Figure 59. Controls configuration.
Number of Controls [1…180]: selects the number of controls that will became
available. For each of them a new ETS tab will be shown.