User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
73
Theme [disabled/enabled]: enables or disables the box for the selection of the
theme.
Volume [disabled/enabled]: box to control the volume of pulsation and sending
sound. There are three volume levels in addition to the mute option.
Doorbell Volume [disabled/enabled]: box to control the volume of doorbell.
There are five volume levels in addition to the mute option.
Doorbell Tone [disabled/enabled]: desired tone (among seven different options)
for the acoustic signals emitted on doorbell.
Note: Doorbell boxes will be only available if the “Object for Doorbell” parameter is
enabled in the custom sounds tab (see section 2.1.10).
2.2.1.2.3 VoIP Calls (License Required)
Z70 v2 configuration page, if VoIP Calls is enabled, will display a button to access the
video intercom and internal call settings of the device:
Figure 54. VoIP Calls
ETS PARAMETERISATION
After enabling the VoIP Calls from “Configuration Page” screen (see section 2.2.1.2), a
new tab will be incorporated into the tree on the left.