User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
72
Label: text that will appear to identify the box.
2.2.1.2.2 Profile
Z70 v2 configuration page, if Device is enabled, will display a button to access the visual
and sound settings of the device:
Figure 52. Profile
ETS PARAMETERISATION
After enabling the Profile from “Configuration Page” screen (see section 2.2.1.2), a new
tab will be incorporated into the tree on the left.
Figure 53. Configuration Page. Profile.
Brightness [disabled/enabled]: enables or disables the box to adjust the
brightness of the display.