User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
65
➢ Use this Text in the Device [disabled/enabled]: enables the text to be used
as the page title in the device.
Automatic Page Shaping [disabled/enabled]: enables choosing whether the
pages in Menu should be automatically distributed depending on the number of
pages configured, or be displayed as a static 3x4 grid.
2.2.1.2 CONFIGURATION PAGE
The Configuration page lets the user to know or adjust certain technical values about the
device, as well as customise the visual and audio adjustments of the user interface:
Figure 46. Configuration Page
ETS PARAMETERISATION
After enabling the Configuration Page from “Pages” screen (see section 2.2.1), a new
tab will be incorporated into the tree on the left.