User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
63
ETS PARAMETERISATION
Figure 43. General pages configuration
The parameters available are:
Number of Pages [1…12]: number of general purpose pages that will be
activated on the device. For each page a dedicated ETS tab will be shown for
configuration.
Default Page [Menu]: dropdown list that sets the page that will behave as the
default page. This page will be the one shown after the inactivity time elapsed.
Menu Page [disabled/enabled]: enables o disables a page with direct access to
available general-purpose pages.
Home Button in the Navigation Bar [disabled/enabled]: of enabled, the
following parameter will be displayed:
➢ Page Linked to the Home Button [
Menu]: select the page to which the
device will navigate when the “Home” button is press.
Configuration Page [disabled/enabled]: if enabled, direct access to the
configuration page from the menu page will be allowed.
Pages Distribution [Empty / 1 Page / … / 12 Page]: set which page, from a list
of 12, will be placed in each of the twelve possible boxes on the screen.