User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
62
2.2 DISPLAY
2.2.1 PAGES
The user interface is organised into pages (up to twelve different pages, in addition to the
‘Configuration Page’), each of which can be accessed from the Menu page, which (unless
the contrary has been parameterised) is automatically shown after the start-up.
The twelve pages are general purpose, at the entire disposal of the integrator, who may
include up to twelve controls with different functionalities per page. The remaining
Configuration page is specific purpose, as it is provided for user customisation of the
device.
The user interface permanently shows a top bar with the current page name, current time
of day and temperature, and if desired, a button that allows the user to return to the “Home”
page:
Figure 41. “Home” button.
In addition, from the menu page, and provided that it has been enabled, the configuration
page can be accessed via a button located in the navigation bar will be possible.
Figure 42. Configuration button