User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
59
Pop-Up n [disabled/enabled]: allows to enable/disable each pop-up. After
enabling each pop-up, a new tab will be incorporated into the tree on the left
named “Pop-Up n”.
2.1.14.2.1 Pop-Up n
Figure 39. Pop-Up n
Pop-Up Trigger: sets the type of object that is used to show the pop-up
message.
➢ [
1 Bit Object]: when this option is selected, the object “[General][Pop-Up n]
1 Bit” appears to launch the pop-up message.
• Values to Hide/Show the Pop-Up [
0 = Hide Pop-Up; 1 = Shown Pop-Up
/ 0 = Shown Pop-Up; 1 = Hide Pop-Up]: allows to choose the polarity of
the 1-bit object to show/hide pop-up.
➢ [1 Byte Object]: allows to show/hide the pop-up through the object
“[General][Pop-Up n] 1 Byte”. When selected, the following parameters
are displayed:
• Object Value to Hide Pop-Up [0…255]: sets the value used to hide the
pop-up.
• Object Value to Show Pop-Up [
0…255]: sets the value used to show the
pop-up.
Note: If the value to hide the pop-up is the same as the value to show it, it
won’t be hidden with any value.