User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
54
ETS PARAMETERISATION
After enabling Internal Calls, in “VoIP Calls” tab (section 2.1.13), a new tab will be
incorporated into the tab tree:
Figure 32. “Internal call” tab
Page Title: Incoming / Outgoing / Ongoing Call: titles of the different
dialogues of the internal calls.
“Communication Error” / “End Call” / “Busy Contact” Label: text displayed
on screen when a call cannot be established with the contact, the call is
terminated or the contact has an ongoing call, respectively.
Default Ringtone [Tone 1 / … / Tone 7]: selects the sound Z70 v2 will make
when it receives an internal call from another device. The selected tone will be
applied after downloading, but can be changed later from the configuration page
(see section 2.2.1.2.3) or by communication object.
Number of Tones [0 / … / 3 / … / 10]: sets how many times the ringtone will
sound.
Import Contacts [From ETS / From the Web]: defines how the contacts list will
be imported. If the “From ETS” option is chosen, the following parameters will
also be displayed:
➢ Contact n [
disabled / enabled]: checkbox enabling a new tab ("Contact n")
where the parameters of each indoor unit are configured (see section
2.1.13.2.1).