User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
53
Figure 31. Generic Outdoor Unit
This tab is analogous to "Outdoor unit n", but the video intercom identification fields
(Outdoor unit ID and Set Static IP) are excluded.
For more information on the configuration of the parameters see section 2.1.13.1.1.
2.1.13.2 INTERNAL CALL (LICENSE REQUIRED)
Note: Internal Call functionality requires a license installation. If not, even being possible
to configure it from ETS, its use will not be accessible.
Z70 v2 can, via its Ethernet connection, make and receive calls from others Z41 COM,
and Z70 v2 and that will be registered. The access to the internal call history will be
enabled as long as, at least one box is configured as an internal call (see section
2.2.2.1.5.6).
To receive calls, each of the screens involved in the communication must have the other
configured as a contact. In a Z70 v2 up to 8 contacts can enable and configure or be
imported up to 100 via web.
For further information about the configuration and importation of contacts via web, please
refer to the “Webserver Tools” manual (available in the product section of Z70 v2 in
Zennio web portal,
www.zennio.com).
In ANNEX II. Internal Call Operation details the functions and controls of the dialogs that
appear in Z70 v2 related to the internal calls functionalities.