User Guide

Table Of Contents

Z50 / Z70 v2 / Z100

https://www.zennio.com Tecnical Support: https://support.zennio.com

2.1.13.1 VIDEO INTERCOM (LICENSE REQUIRED)

Note: Video Intercom functionality requires a license installation. If not, even being

possible to configure it from ETS, its use will not be accessible.

Z70 v2 will be able to receive calls and show images from the camera of a Zennio outdoor

unit, GetFace IP. Moreover, the door can be opened and a common call log is available

for all configured video intercom.

Notes: To access the call log and visualization of the image of the camera is required

necessary to parameterise a box as a Video Intercom. For further information see section

2.2.2.1.5.5.

In a Z70 v2 up to 21 outdoor units can be enabled, one of them being generic. Each

outdoor unit can parameterize up to 4 doors, for a total of 84 doors controllable by one

Z70 v2. The GetFace IP is responsible for controlling the power supply to the doors locks.

Meanwhile, each GetFace IP can call to a maximum of 10 Z70 v2 in parallel.

In addition, in ANNEX I. Video Intercom Operation, the functions and controls of the

different dialogues that appear in Z70 v2 in relation to the video intercom functionalities

are detailed.

For further information about the configuration of Z70 v2 and external units GetFace IP,

please refer to the “Z41 COM / Z70 + GetFace IP Configuration Guide” and the specific

documentation of “Zennio GetFace IP” (available at