User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
43
Figure 24. Configuration to export icon in Illustrator.
2.1.12 IP CONFIGURATION
Z70 v2 is able to communicate with other external (GetFace IP) or internal (Z41 COM o
Z70 v2) units via Ethernet connection. Such communications will require correct
configuration of certain general IP parameters.
ETS PARAMETERISATION
Figure 25. IP Configuration
Device Description: assigns a name to the device.
IP Address Assignment [DHCP / Static]: selects whether the IP is set by the
DHCP protocol or is defined in a static way. If the Static option is chosen, the
following parameters will be displayed:
➢ IP Address [
192.168.1.101]: is used to uniquely identify the Z70 v2 for
functionalities such as Webserver, connection to the display via internet,
obtaining the time via NTP or VoIP. Therefore, it is the IP address that will