User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
42
Link: icons for direct link boxes or pages (maximum 40 customised icons).
Status: icons for box indicators (maximum 40 customised icons).
Notes:
➢ The maximum size of the icons cannot exceed 20KB.
➢ If the name or the format of any of the files is not correct, it will not be
imported.
➢ Custom icons do not modify when Icons type parameter is set as
[Monochromatic]
After completing the above steps and connecting the USB to the Z70 v2, as soon as the
Z70 v2 identifies the inserted USB flash drive, a USB icon will appear in the top bar and a
dialog will inform the user of the action on screen: “New icons imported”.
Recommendations to generate customised icons
When designing and generating custom icons, it is recommended to take into account the
following indications to ensure their correct display in Z70 v2:
The viewbox of each of the SVG files should be square (aspect ratio 1:1).
When exporting the icons:
➢ Check the “Convert to outlines” option in the font options.
➢ Set the number of decimals to 3.
➢ Check the “Responsive” option.
Figure 24 shows an example of the options in Illustrator.