User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
37
➢ Default Ringtone (after Programming) [Ringtone 1 / … / Ringtone 7]:
desired melody for doorbell after ETS download.
➢ Default Volume (after Programming) [No sound / 1 / 2 /
3 / 4 / 5]: volume
of the doorbell sound after ETS download.
2.1.11 UPDATE SETTING
The Z70 v2 enables updates via USB of some of the available functions. These
functionalities and how they should be updated are described in the following sections.
ETS PARAMETERISATION
Figure 21. Firmware Update
USB Updating [Disabled / Enabled]: enables or disables the device firmware
update through the USB port. Thus, if this parameter is disabled, any action
requiring the use of USB will have no effect.
Network Updating: [Disabled / Enabled / Enabled (Password Protected]: the
latter brings the option to restrict the updates via Ethernet to those who can
provide the required password to the update tool before the firmware download
starts. This password, consisting in four numbers, needs to be set in ETS by the
integrator.
Note: reading the specific user manual of the firmware update process available
at the Zennio webpage is encouraged, as it contains particular remarks regarding
the password protection.