User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
31
ETS PARAMETERISATION
After enabling Schedulers from “Configuration” screen (see section 2.1.1), a new tab will
be incorporated into the tree on the left.
Figure 15. Schedulers tab
Title: text displayed at the top of the general scheduler panel.
Number of Fixed Schedulers [1…30]: sets the number of schedulers available
for setting on the display.
➢ Fixed Scheduler n Icon [
Clock]: selects the icon to be displayed in the
navigation area for each scheduler.
2.1.6 SCREENSAVER
Z70 v2 offers the possibility to display a screensaver after a period of inactivity,
configurable by parameter.
The screensaver can be configured to only show the current Time, the current external
Temperature or both.