User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
27
Security Levels [One Level / Two Levels]: parameter for selecting whether
one or two security levels will be available.
Note: with independence of the option selected here, it will be necessary to
establish the security level desired for each specific page of controls.
Protect Again after Home Button is Pressed [disabled/enabled]: if enabled,
the security of the boxes and/or pages will be restored when the Home Button
is pressed.
Password [Level 1: 1234; Level 2: 5678]: parameter made of four additional
textboxes, each of which should contain one of the four consecutive digits
[0…9] that will compose the password. In case of enabling two security levels,
the Password parameter will show twice, being the first one referred to the
password of Level 1, and the second one to the password of Level 2.
Figure 12. Two security levels
Important: the password insertion dialog features a specific option (lower left
button) that lets the user change, in runtime, the passwords originally set by
parameter. After accessing this option and prior to typing the new password,
the text box will be set with an orange background and the user will be required
to type the corresponding old password (level 1 or level 2). Note that although
it will be possible to type password 2 even if the device asks for password 1,
the new password typed afterwards will be anyway stored as the new password
for level 1.
Security Pad Labels: parameter consisting in six additional textboxes,
intended for the customisation of the messages that the device shows (or may
show) when the user interacts with the password insertion dialog.
➢ Password 1 [
Enter Password 1]: message shown when the user is
required to type in the password for level 1.