User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
26
Figure 10. Security pop-up
In case of setting up two levels, the first one is assumed to be enclosed by the second
one. This means that whenever the device asks the user to type password #1 (to enter
a certain item); password #2 will also be accepted. On the contrary, password #1 cannot
be used instead of password #2. This behaviour permits, therefore, making password #2
available to users with further privileges while password #1 is assigned to users with
fewer privileges.
Moreover, when accessing to a protected page, all the boxes and pages with the same
or lower access level of the introduced password, are automatically unlocked. It can be
set if the elements are relocked after pressing the Home Button. Anyway, security is
reactivated when the time for considering inactivity expires.
ETS PARAMETERISATION
This screen permits selecting how many security levels (one or two) will be available for
the configuration of the access to the control pages or the boxes.
Figure 11. Security