User Guide

Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
21
“[General] Activity”: 1-bit object to force activity/inactivity state on the device.
For further information, please refer to the user manual “Proximity and
Luminosity Sensor” and “Brightness” (available in the Z70 v2 product section
at the Zennio homepage, www.zennio.com).
“[General] Localization – Select” and “[General] Translations – Select”:
4-byte and 2-bytes objects to change, respectively, the locale and the language
in the screen (see section 2.1.2).
“[Profile] Theme”: 1-byte object to change the theme used in the screen.
“[Profile] Volume”: 1-byte percentage object to change the volume at which
the user sounds of device will be emitted.
“[C001][] Switch Indicator”: object associated with Control 1 enabled by
default.
“[Profile] Display – Brightness”: 1-byte percentage object to change the
display brightness level.
“[General] Proximity Sensor”, “[General] External Proximity Detection”
and “[General] Proximity Detection”: 1-bit object whose functionality is tied
to the proximity sensor. For further information, please refer to the user manual
“Proximity and Luminosity Sensor” (available in the Z70 v2 product section
at the Zennio homepage,
www.zennio.com).
“[Internal Temp. Probe] Current Temperature” (only in Z70 v2): 2-byte
object through which the value of the current measurement of the built-in
sensor will be sent to the bus, according to the parameterisation (see section
2.1.7).
2.1.2 LOCALE
The locale consists of a language and region identifier, which will determine the
language and how certain visual aspects of the device are displayed, such as:
The temperature scale: Celsius or Fahrenheit.
Time format: 12 or 24 hours.
Date format: dd-mm-yyyy, mm-dd-yyy o yyyy-mm-dd.