User Guide
Table Of Contents
- Contents
- Document updates
- 1 Introduction
- 2 Configuration
- 2.1 General
- 2.2 Display
- 2.3 Inputs
- 2.4 Thermostat n
- ANNEX I. Video Intercom Operation
- ANNEX II. Internal Call Operation
- ANNEX III. Remote Control via IP
- ANNEX IV. Graphs
- ANNEX V. Differences with Z50 / Z100
- ANNEX VI. Communication Objects
Z50 / Z70 v2 / Z100
https://www.zennio.com Tecnical Support: https://support.zennio.com
156
0x7 (Reducir 1%)
0x8 (Detener)
0x9 (Subir 100%)
...
0xF (Subir 1%)
4 Bit
C - - T -
DPT_Control_Dimming
0x0 (Detener)
0x1 (Reducir 100%)
...
0x7 (Reducir 1%)
0x8 (Detener)
0x9 (Subir 100%)
...
0xF (Subir 1%)
[Ix] [Long Press] Darker
Long Pr. -> Darker; Release ->
Stop
4 Bit
C - - T -
DPT_Control_Dimming
0x0 (Detener)
0x1 (Reducir 100%)
...
0x7 (Reducir 1%)
0x8 (Detener)
0x9 (Subir 100%)
...
0xF (Subir 1%)
[Ix] [Long Press]
Brighter/Darker
Long Pr. -> Brighter/Darker;
Release -> Stop
1 Bit
C - - T -
DPT_Switch
0/1
[Ix] [Long Press] Light On
Sending of 1 (On)
1 Bit
C - - T -
DPT_Switch
0/1
[Ix] [Long Press] Light Off
Sending of 0 (Off)
1 Bit
I
C - W T -
DPT_Switch
0/1
[Ix] [Long Press] Light On/Off
Switching 0/1
1 Byte
C - - T -
DPT_SceneControl
0-63; 128-191
[Ix] [Long Press] Run Scene
Sending of 0 - 63
1 Byte
C - - T -
DPT_SceneControl
0-63; 128-191
[Ix] [Long Press] Save Scene
Sending of 128 - 191
1 Bit
O
C R - T -
DPT_Alarm
0/1
[Ix] [Switch/Sensor] Alarm:
Breakdown or Sabotage
1 = Alarm; 0 = No Alarm
2
Bytes
C - - T -
9.xxx
-671088,64 - 670433,28
[Ix] [Long Press] Constant Value
(Float)
Float Value
2
Bytes
C - - T -
DPT_Value_2_Ucount
0 - 65535
[Ix] [Long Press] Constant Value
(Integer)
0 - 65535
1 Byte
C - - T -
DPT_Scaling
0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte
C - - T -
DPT_Value_1_Ucount
0 - 255
[Ix] [Long Press] Constant Value
(Integer)
0 - 255
1418, 1424, 1430, 1436
1 Bit
C - - T -
DPT_Trigger
0/1
[Ix] [Long Press/Release] Stop
Shutter
Release -> Stop Shutter
1419, 1425, 1431, 1437
1 Byte
I
C - W - -
DPT_Scaling
0% - 100%
[Ix] [Long Press] Dimming
Status (Input)
0% - 100%
1 Byte
I
C - W - -
DPT_Scaling
0% - 100%
[Ix] [Long Press] Shutter Status
(Input)
0% = Top; 100% = Bottom
1438
1 Byte
I
C - W - -
DPT_SceneNumber
0 - 63
[Motion Detector] Scene Input
Scene Value
1439
1 Byte
C - - T -
DPT_SceneControl
0-63; 128-191
[Motion Detector] Scene Output
Scene Value
1440, 1469, 1498, 1527
1 Byte
O
C R - T -
DPT_Scaling
0% - 100%
[Ix] Luminosity
0-100%